您的位置:主页 > 道闸资讯 >

「伊春小区道闸」挡车器如何设计上限位?

日期:2019-06-18 08:42


「伊春小区道闸」挡车器如何设计上限位?

How to design the upper limit of "Yichun District Road Gate" block?



平时在小区、停车场、高速出入口,我们总能看到一根自动上升降落的杆子,它就是道闸,有的人也称其为挡车器。


Usually in the district, parking lot, high-speed entrances and exits, we can always see a pole that automatically rises and falls, it is the gate, some people also call it the car blocker.


道闸是停车场收费管理系统的重要组成部分,在道闸杆一升一降运动中,管理系统就完成了对车辆进出、收费、识别等工作的管理控制活动。


Gate is an important part of the parking fee management system. In the movement of the gate pole, the management system has completed the management and control activities of vehicle entry and exit, fee collection, identification and so on.


一般来说,道闸厂家在安装时就会对电动门杆的平衡状态进行专业的调试,通过利用特殊的平平衡结构,保证闸杆在起杆时垂直,落杆时水平。


Generally speaking, when installing the gate, the manufacturer will debug the balance state of the electric gate pole professionally. By using the special balance structure, the gate pole is vertical when starting and horizontal when falling.



鹤岗小区栅栏道闸


经过一段时间的使用,有的用户会发现闸杆在起落时垂直或水平度略有偏移,这就表示限位需要调试了,如何调试呢?


After a period of use, some users will find that the vertical or horizontal degree of the brake rod is slightly offset when it takes off and down, which means that the limit needs to be debugged. How to debug?


其实很简单,伊春创隆科技作为专业的道闸生产厂家,今天就来教你道闸限位的调节方法。


In fact, it is very simple. As a professional sluice manufacturer, Yichun Chuanglong Technology will teach you the regulation method of sluice limit today.


道闸限位调试主要是调试机箱内的限位挡板


Limit debugging of gate is mainly to debug the limit baffle in the chassis.


用户只需要打开机箱门盖,利用十字螺丝刀拧松限位挡板上螺丝,在拧松螺丝后,慢慢转动限位挡板,边转边观察道闸杆是否达到水平位置,只要闸杆到水平位置就说明高度好了,拧紧螺丝,锁上箱门,调试工作就完成了。


Users only need to open the case door cover, use cross screwdriver to loosen the screw on the limit baffle, after loosening the screw, slowly rotate the limit baffle, while turning to observe whether the gate rod reaches the horizontal position, as long as the gate rod reaches the horizontal position, the height is good, tighten the screw, lock the box door, debugging work is completed.


在调试限位时,用户需要掌握一个规律:如果道闸杆是起杆不到位,限位挡板需顺着逆时针方向调动,超过水平位置,则是顺时针方向调动。


When debugging limit, users need to grasp a rule: if the gate rod is not in place, the limit baffle should be moved counterclockwise and clockwise when it exceeds the horizontal position.


如果道闸起杆后达不到垂直度,限位挡板顺时针方向微调,只至垂直度达标后即可。


If the verticality of the gate does not reach after starting, the limit baffle is fine-tuned clockwise until the verticality reaches the standard.


「伊春小区道闸」挡车器如何设计上限位?


How to design the upper limit of "Yichun District Road Gate" block?