「齐齐哈尔道闸」挡车器抬杆不能竖直原因

日期:2019-08-05 16:33

齐齐哈尔道闸挡车器抬杆不能竖直原因






 可能原因:

Possible causes



1.连杆长度调节不当

Improper adjustment of connecting rod length



2.固定限位开关的螺母松动


 Nut loosening of fixed limit switch


 

双鸭山道闸
 



故障排除方法:

Troubleshooting Method



1.打开道闸机箱门,机箱盖及离合器,检查主动连杆与中间连杆重合时,道闸杆是否处于竖直位置,主动连杆与中间连杆成一直线时,道闸杆是否处于水平位置

 

Open the gate, cover and clutch of the gate, check whether the gate bar is in the vertical position when the active connecting rod coincides with the intermediate connecting rod, and whether the gate bar is in the horizontal position when the active connecting rod is in line with the intermediate connecting rod.




如不能实现以上状态即可通过调节连杆螺丝,使两连杆重合时,道闸杆处于竖直位置,两连杆成一条直线时,道闸杆处于水平位置
 

If the above state can not be achieved, the connecting rod screw can be adjusted so that when the two connecting rods coincide, the gate rod is in a vertical position, and when the two connecting rods are in a straight line, the gate rod is in a horizontal position.


 





2.调整好道闸杆位置,并拧紧螺母。


Adjust the position of the gate rod and tighten the nut


 

哈尔滨创隆.欢迎您.