「佳木斯道闸」广告道闸维修说明

日期:2019-08-20 10:16
佳木斯道闸广告道闸维修说明

 
 


  使用前必须检查电源电压是否与本产品相符,即220V±10%,为了考虑到有些地区存在欠


 
Before use, it is necessary to check whether the voltage of the power supply is consistent with the product, that is 220V (+10%). In order to consider the shortcomings in some areas, it is necessary to check whether the voltage of the power supply is in conformity with the product


 
  压现象,电压低至180V时仍保持可靠的工作性能。
 

Voltage Phenomenon, Maintaining Reliable Performance at Low Voltage to 180V

 

  当需要打开闸杆时,按一下控制器或遥控器上的“起杆”键,此时闸杆会自动起杆,到位后自动停止。
 


When it is necessary to open the brake rod, press the "starting rod" key on the controller or remote control, and the brake rod will start automatically when it is in place




 
 哈尔滨广告道闸批发

 


  当需要关闭闸杆时,按一下控制器或遥控器上的“落杆”键,此时闸杆会自动落杆,到位后自动停止。
 


When it is necessary to close the brake rod, press the "drop bar" key on the controller or remote control, then the brake rod will drop automatically and stop automatically when it is in place.
 


 
  在落杆过程中,如遇有车辆及行人通过可按“起杆”键,闸杆会马上往起杆方向运行,或按“停止”键,闸杆会中断运行。(注:在正常运行时请不要按“停止”键)
 



In the process of falling, if vehicles and pedestrians can press the "starting bar" button, the brake rod will immediately move to the direction of the starting bar, or press the "stop" button, the brake rod will interrupt operation. (Note: Please do not press the stop button during normal operation)
 



  停电时若闸杆处于水平状态;可将道闸机箱门打开,用摇手将杆抬起。来电后,直接按“落杆”键,闸杆会自动落杆,恢复正常使用。
 


When power failure occurs, if the brake rod is in a horizontal state, the box door of the gate can be opened and the brake rod can be lifted by a rocker. After the call, press the "drop bar" button directly, the brake bar will drop automatically and return to normal use.





哈尔滨创隆,欢迎您.